{"id":1011,"date":"2020-05-04T15:11:51","date_gmt":"2020-05-04T19:11:51","guid":{"rendered":"https:\/\/www.baronsoftware.com\/Blog\/?p=1011"},"modified":"2020-05-04T15:11:55","modified_gmt":"2020-05-04T19:11:55","slug":"using-sata-wire-3-0-to-clone-drives","status":"publish","type":"post","link":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/","title":{"rendered":"Using SATA Wire 3.0 to clone drives"},"content":{"rendered":"\n

Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives in multiple machines. SATA Wire is an amazing piece of software. It comes with a cable which connects the SSD to the USB port 3.0. It is also compatible with a USB 2.0 port.<\/p>\n\n\n\n

An average person who has a little computer knowledge can clone any computer drive to the SSD drive with ease. <\/p>\n\n\n\n

\"\"<\/a><\/figure><\/div>\n\n\n\n

Apricorn sells the SATA Wire kit for about $30. The cable and software is reusable. <\/p>\n\n\n\n

Simple steps to clone.<\/h3>\n\n\n\n

Step 1: Install the software. There is an option to get the latest software from Apricorn web site. <\/p>\n\n\n\n

Step 2: Insert the one end of the cable into the SSD and insert other end into the USB port.<\/p>\n\n\n\n

Step 3: Start the software and select your source drive.<\/strong> This is usually the internal computer’s drive.<\/p>\n\n\n\n

\"Select<\/figure><\/div>\n\n\n\n

Step 4: Select your Destination drive<\/strong>
This is your external drive connected to your computer by Apricorn\u2019s cable. You will have the ability to exclude from the clone files you no longer want or are just too large.<\/p>\n\n\n\n

\"Set<\/figure><\/div>\n\n\n\n

Step 5: Press the “Start Clone” button<\/strong>
This may be fairly quick or may take a while based on the size of the internal drive.<\/p>\n\n\n\n

Installing the SSD Drive<\/h3>\n\n\n\n

Once the process of cloning has completed you will need to unplug the SSD from the USB port.<\/p>\n\n\n\n

Shut down the computer<\/p>\n\n\n\n

Open the computer case and remove the internal hard drive or if you have the room unplug the power.<\/p>\n\n\n\n

Insert the SSD drive into the computer. Depending whether there is a cage that fits it or you may have to purchase a kit to hold a 2.5 SSD drive. The following kit can be located on Amazon selling for about $10.<\/p>\n\n\n\n

\"Sabrent<\/a><\/figure><\/div>\n\n\n\n

Install the SSD drive and close the case. Boot the machine. The startup time will be amazing with a SSD getting Windows 10 to be fully functional in less than one minute.<\/p>\n\n\n\n

You can also use the internal drive as a back up for the SSD and important files. The SSD needs to be the primary drive for boot up and the internal drive will be secondary in the settings.<\/p>\n\n\n\n

Used in the last project<\/p>\n\n\n\n

SATA Wire kit.<\/p>\n\n\n\n

SSD 1 Gigabyte Samsung <\/p>\n\n\n\n

Sabrent 3.5-Inch to x2 SSD \/ 2.5-Inch Internal Hard Drive Mounting Kit<\/p>\n","protected":false},"excerpt":{"rendered":"

Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives in multiple machines. SATA Wire is an amazing piece of software. It comes with a cable which connects the SSD to the USB port 3.0. It is also compatible with a USB 2.0 port. An average person who has a little computer knowledge […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"rop_custom_images_group":[],"rop_custom_messages_group":[],"rop_publish_now":"initial","rop_publish_now_accounts":[],"rop_publish_now_history":[],"rop_publish_now_status":"pending","_exactmetrics_skip_tracking":false,"_exactmetrics_sitenote_active":false,"_exactmetrics_sitenote_note":"","_exactmetrics_sitenote_category":0,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[17],"tags":[278,281,279,20,6,280],"class_list":["post-1011","post","type-post","status-publish","format-standard","hentry","category-hardware-reviews","tag-apricorn","tag-baron","tag-clone","tag-delphi","tag-software","tag-ssd"],"yoast_head":"\nUsing SATA Wire 3.0 to clone drives - Baron Software<\/title>\n<meta name=\"description\" content=\"Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives. It is amazing software with a cable to connect the SSD to the USB port 3.0\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Using SATA Wire 3.0 to clone drives - Baron Software\" \/>\n<meta property=\"og:description\" content=\"Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives. It is amazing software with a cable to connect the SSD to the USB port 3.0\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/\" \/>\n<meta property=\"og:site_name\" content=\"Baron Software\" \/>\n<meta property=\"article:published_time\" content=\"2020-05-04T19:11:51+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2020-05-04T19:11:55+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/05\/sata3_wire_kit-300x300.png\" \/>\n<meta name=\"author\" content=\"richard@baronsoftware.com\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:title\" content=\"Using SATA Wire 3.0 to clone drives\" \/>\n<meta name=\"twitter:description\" content=\"Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives in multiple machines. It is an amazing piece of software along with a cable to connect the SSD to the USB port 3.0 as well as being compatible with 2.0.\" \/>\n<meta name=\"twitter:image\" content=\"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2019\/08\/BaronSoftwareLogo_2020.fw_.png?fit=422%2C114&ssl=1\" \/>\n<meta name=\"twitter:creator\" content=\"@Rbaroniunas\" \/>\n<meta name=\"twitter:site\" content=\"@Rbaroniunas\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"richard@baronsoftware.com\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/\"},\"author\":{\"name\":\"richard@baronsoftware.com\",\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/#\\\/schema\\\/person\\\/079d370e4230be9d5f75885bb33dd8cd\"},\"headline\":\"Using SATA Wire 3.0 to clone drives\",\"datePublished\":\"2020-05-04T19:11:51+00:00\",\"dateModified\":\"2020-05-04T19:11:55+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/\"},\"wordCount\":377,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/wp-content\\\/uploads\\\/2020\\\/05\\\/sata3_wire_kit-300x300.png\",\"keywords\":[\"Apricorn\",\"Baron\",\"Clone\",\"Delphi\",\"Software\",\"SSD\"],\"articleSection\":[\"Hardware Reviews\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/\",\"url\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/\",\"name\":\"Using SATA Wire 3.0 to clone drives - Baron Software\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/wp-content\\\/uploads\\\/2020\\\/05\\\/sata3_wire_kit-300x300.png\",\"datePublished\":\"2020-05-04T19:11:51+00:00\",\"dateModified\":\"2020-05-04T19:11:55+00:00\",\"description\":\"Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives. It is amazing software with a cable to connect the SSD to the USB port 3.0\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/#primaryimage\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/www.baronsoftware.com\\\/Blog\\\/wp-content\\\/uploads\\\/2020\\\/05\\\/sata3_wire_kit.png?fit=1280%2C1280&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/www.baronsoftware.com\\\/Blog\\\/wp-content\\\/uploads\\\/2020\\\/05\\\/sata3_wire_kit.png?fit=1280%2C1280&ssl=1\",\"width\":1280,\"height\":1280},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/using-sata-wire-3-0-to-clone-drives\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Using SATA Wire 3.0 to clone drives\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/#website\",\"url\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/\",\"name\":\"Baron Software\",\"description\":\"Highest Quality Software Developed.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/#organization\",\"name\":\"Baron Software\",\"url\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i2.wp.com\\\/www.baronsoftware.com\\\/Blog\\\/wp-content\\\/uploads\\\/2018\\\/01\\\/BaronSoftwareLogo.fw_.png?fit=1920%2C400&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i2.wp.com\\\/www.baronsoftware.com\\\/Blog\\\/wp-content\\\/uploads\\\/2018\\\/01\\\/BaronSoftwareLogo.fw_.png?fit=1920%2C400&ssl=1\",\"width\":1920,\"height\":400,\"caption\":\"Baron Software\"},\"image\":{\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/Rbaroniunas\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.baronsoftware.com\\\/Blog\\\/#\\\/schema\\\/person\\\/079d370e4230be9d5f75885bb33dd8cd\",\"name\":\"richard@baronsoftware.com\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e5a3cc457a883c420e8af899f2639359d220ae6bfed4587ca7ed17f45ca0c21c?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e5a3cc457a883c420e8af899f2639359d220ae6bfed4587ca7ed17f45ca0c21c?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e5a3cc457a883c420e8af899f2639359d220ae6bfed4587ca7ed17f45ca0c21c?s=96&d=mm&r=g\",\"caption\":\"richard@baronsoftware.com\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Using SATA Wire 3.0 to clone drives - Baron Software","description":"Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives. It is amazing software with a cable to connect the SSD to the USB port 3.0","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/","og_locale":"en_US","og_type":"article","og_title":"Using SATA Wire 3.0 to clone drives - Baron Software","og_description":"Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives. It is amazing software with a cable to connect the SSD to the USB port 3.0","og_url":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/","og_site_name":"Baron Software","article_published_time":"2020-05-04T19:11:51+00:00","article_modified_time":"2020-05-04T19:11:55+00:00","og_image":[{"url":"https:\/\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/05\/sata3_wire_kit-300x300.png","type":"","width":"","height":""}],"author":"richard@baronsoftware.com","twitter_card":"summary_large_image","twitter_title":"Using SATA Wire 3.0 to clone drives","twitter_description":"Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives in multiple machines. It is an amazing piece of software along with a cable to connect the SSD to the USB port 3.0 as well as being compatible with 2.0.","twitter_image":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2019\/08\/BaronSoftwareLogo_2020.fw_.png?fit=422%2C114&ssl=1","twitter_creator":"@Rbaroniunas","twitter_site":"@Rbaroniunas","twitter_misc":{"Written by":"richard@baronsoftware.com","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/#article","isPartOf":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/"},"author":{"name":"richard@baronsoftware.com","@id":"https:\/\/www.baronsoftware.com\/Blog\/#\/schema\/person\/079d370e4230be9d5f75885bb33dd8cd"},"headline":"Using SATA Wire 3.0 to clone drives","datePublished":"2020-05-04T19:11:51+00:00","dateModified":"2020-05-04T19:11:55+00:00","mainEntityOfPage":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/"},"wordCount":377,"commentCount":0,"publisher":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/#organization"},"image":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/#primaryimage"},"thumbnailUrl":"https:\/\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/05\/sata3_wire_kit-300x300.png","keywords":["Apricorn","Baron","Clone","Delphi","Software","SSD"],"articleSection":["Hardware Reviews"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/","url":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/","name":"Using SATA Wire 3.0 to clone drives - Baron Software","isPartOf":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/#primaryimage"},"image":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/#primaryimage"},"thumbnailUrl":"https:\/\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/05\/sata3_wire_kit-300x300.png","datePublished":"2020-05-04T19:11:51+00:00","dateModified":"2020-05-04T19:11:55+00:00","description":"Recently Baron Software was using Apricorn SATA Wire 3.0 to clone drives. It is amazing software with a cable to connect the SSD to the USB port 3.0","breadcrumb":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/#primaryimage","url":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/05\/sata3_wire_kit.png?fit=1280%2C1280&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/05\/sata3_wire_kit.png?fit=1280%2C1280&ssl=1","width":1280,"height":1280},{"@type":"BreadcrumbList","@id":"https:\/\/www.baronsoftware.com\/Blog\/using-sata-wire-3-0-to-clone-drives\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.baronsoftware.com\/Blog\/"},{"@type":"ListItem","position":2,"name":"Using SATA Wire 3.0 to clone drives"}]},{"@type":"WebSite","@id":"https:\/\/www.baronsoftware.com\/Blog\/#website","url":"https:\/\/www.baronsoftware.com\/Blog\/","name":"Baron Software","description":"Highest Quality Software Developed.","publisher":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.baronsoftware.com\/Blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.baronsoftware.com\/Blog\/#organization","name":"Baron Software","url":"https:\/\/www.baronsoftware.com\/Blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.baronsoftware.com\/Blog\/#\/schema\/logo\/image\/","url":"https:\/\/i2.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2018\/01\/BaronSoftwareLogo.fw_.png?fit=1920%2C400&ssl=1","contentUrl":"https:\/\/i2.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2018\/01\/BaronSoftwareLogo.fw_.png?fit=1920%2C400&ssl=1","width":1920,"height":400,"caption":"Baron Software"},"image":{"@id":"https:\/\/www.baronsoftware.com\/Blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/x.com\/Rbaroniunas"]},{"@type":"Person","@id":"https:\/\/www.baronsoftware.com\/Blog\/#\/schema\/person\/079d370e4230be9d5f75885bb33dd8cd","name":"richard@baronsoftware.com","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/e5a3cc457a883c420e8af899f2639359d220ae6bfed4587ca7ed17f45ca0c21c?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/e5a3cc457a883c420e8af899f2639359d220ae6bfed4587ca7ed17f45ca0c21c?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/e5a3cc457a883c420e8af899f2639359d220ae6bfed4587ca7ed17f45ca0c21c?s=96&d=mm&r=g","caption":"richard@baronsoftware.com"}}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p2e6qU-gj","jetpack-related-posts":[{"id":915,"url":"https:\/\/www.baronsoftware.com\/Blog\/toshiba-7200rpm-sata-iii-6gb-s-3-5-oem-internal-hard-drive-review\/","url_meta":{"origin":1011,"position":0},"title":"Toshiba 7200RPM SATA III 6Gb\/s 3.5″ OEM Internal Hard Drive Review","author":"richard@baronsoftware.com","date":"July 4, 2018","format":false,"excerpt":"Toshiba 7200RPM SATA III 6Gb\/s 3.5\" OEM Internal Hard Drive Review \u00a0 The Toshiba P300 Series 3.5 internal hard drive offers the storage capacity you need and the performance you demand. No matter what brand of desktop PC you are using, this reliable hard drive can take your performance and\u2026","rel":"","context":"In "Hardware Reviews"","block_context":{"text":"Hardware Reviews","link":"https:\/\/www.baronsoftware.com\/Blog\/category\/hardware-reviews\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2018\/07\/Toshiba.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":474,"url":"https:\/\/www.baronsoftware.com\/Blog\/guide-building-pc-step-step\/","url_meta":{"origin":1011,"position":1},"title":"Guide on building a PC step by step","author":"richard@baronsoftware.com","date":"July 29, 2017","format":false,"excerpt":"Guide on building a PC step by step Whether you are a person that loves to put things together or build a great gaming machine the following steps will assist you in the building planning stages. The major difference between purchasing a BOX versus a BUILD can be vast based\u2026","rel":"","context":"In "Computer PC Tips - bits and bytes"","block_context":{"text":"Computer PC Tips - bits and bytes","link":"https:\/\/www.baronsoftware.com\/Blog\/category\/pc-tips-bits-bytes\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2017\/07\/13-145-013-V02-300x225.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":492,"url":"https:\/\/www.baronsoftware.com\/Blog\/parallels-desktop-13-released-mac\/","url_meta":{"origin":1011,"position":2},"title":"Parallels Desktop 13 Released for the Mac","author":"richard@baronsoftware.com","date":"August 22, 2017","format":false,"excerpt":"Parallels Desktop 13 Released for the Mac \u00a0 There are over 40 new features, more tools, and better-than-ever performance with the latest Parallels Release. \u00a0Ready for macOS\u00ae High Sierra (10.13) and Windows 10 Fall Creators Update, plus 40 new features. 47% faster access to Windows files and documents Move large\u2026","rel":"","context":"In "Software Events"","block_context":{"text":"Software Events","link":"https:\/\/www.baronsoftware.com\/Blog\/category\/software-events\/"},"img":{"alt_text":"Parallels","src":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2017\/08\/Parallels.png?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":1027,"url":"https:\/\/www.baronsoftware.com\/Blog\/purchase-a-western-digitial-my-cloud-nas-server\/","url_meta":{"origin":1011,"position":3},"title":"Purchase a Western Digitial My Cloud NAS Server","author":"richard@baronsoftware.com","date":"July 31, 2020","format":false,"excerpt":"The WD 8 TB My Cloud EX2 Ultra NAS Server is a fantastic device to place in your work or home environment. Once connected a user can access the device from all of the internal machines within the office. They can also access the NAS server from the outside world\u2026","rel":"","context":"In "Computer PC Tips - bits and bytes"","block_context":{"text":"Computer PC Tips - bits and bytes","link":"https:\/\/www.baronsoftware.com\/Blog\/category\/pc-tips-bits-bytes\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/07\/MyCloudEX2Ultra-Hero.jpg.thumb_.1280.1280.jpg?fit=1200%2C586&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/07\/MyCloudEX2Ultra-Hero.jpg.thumb_.1280.1280.jpg?fit=1200%2C586&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/07\/MyCloudEX2Ultra-Hero.jpg.thumb_.1280.1280.jpg?fit=1200%2C586&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/07\/MyCloudEX2Ultra-Hero.jpg.thumb_.1280.1280.jpg?fit=1200%2C586&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2020\/07\/MyCloudEX2Ultra-Hero.jpg.thumb_.1280.1280.jpg?fit=1200%2C586&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":124,"url":"https:\/\/www.baronsoftware.com\/Blog\/nvidia-gtx-770-video-card-simple-installation-and-high-performance\/","url_meta":{"origin":1011,"position":4},"title":"Nvidia GTX 770 Video Card simple installation and high performance.","author":"richard@baronsoftware.com","date":"July 4, 2015","format":false,"excerpt":"Nvidia has been a leader in high performance as well as quality when it comes to their video cards. \u00a0I recently installed the Nvidia\u00a0GeForce GTX 770 2GB GDDR5 PCI-Express Video Card - One Dual Link DVI-I, One Dual Link DVI-D, One HDMI, One Display Port into a custom built Intel\u2026","rel":"","context":"In "Computer PC Tips - bits and bytes"","block_context":{"text":"Computer PC Tips - bits and bytes","link":"https:\/\/www.baronsoftware.com\/Blog\/category\/pc-tips-bits-bytes\/"},"img":{"alt_text":"Nvidia GTX770","src":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2015\/07\/Nvidia-GTX770-300x200.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":201,"url":"https:\/\/www.baronsoftware.com\/Blog\/embarcadero-and-baron-software-powerstudio-case-study-which-monitors-sql-performance\/","url_meta":{"origin":1011,"position":5},"title":"Embarcadero and Baron Software Powerstudio case study which monitors SQL Performance","author":"richard@baronsoftware.com","date":"January 7, 2016","format":false,"excerpt":"Embarcadero and Baron Software has issued a case study that demonstrates the benefits of using Microsoft SQL Powerstudio product line. \u00a0Powerstudio is a robust package that monitors SQL performance and can provide assistance for clients to update or create tables, stored procedures, etc. for various SQL servers some being Oracle,\u2026","rel":"","context":"In "Rad Studio Delphi Development"","block_context":{"text":"Rad Studio Delphi Development","link":"https:\/\/www.baronsoftware.com\/Blog\/category\/rad-studio-embarcadero-delphi-development\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2016\/01\/Case-Study.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2016\/01\/Case-Study.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.baronsoftware.com\/Blog\/wp-content\/uploads\/2016\/01\/Case-Study.png?resize=525%2C300&ssl=1 1.5x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/posts\/1011","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/comments?post=1011"}],"version-history":[{"count":1,"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/posts\/1011\/revisions"}],"predecessor-version":[{"id":1016,"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/posts\/1011\/revisions\/1016"}],"wp:attachment":[{"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/media?parent=1011"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/categories?post=1011"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.baronsoftware.com\/Blog\/wp-json\/wp\/v2\/tags?post=1011"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}